Afternoon!
I'm making a workbench (I fix computers) in a bedrom. I'm using a worktop across an alcove and the corners are not straight as it has been skimmed at least twice. I've got the worktop in place and I bought some matching upstands and have a couple of questions on the internal joints. I'm not looking for perfection, but I would like to do it right, if possible.
It's a pretty simple set up of 3 pieces, 2x 55cm for the sides and 1x 218cm for the back with two internal joints into...
Internal corners for worktop upstands
I'm making a workbench (I fix computers) in a bedrom. I'm using a worktop across an alcove and the corners are not straight as it has been skimmed at least twice. I've got the worktop in place and I bought some matching upstands and have a couple of questions on the internal joints. I'm not looking for perfection, but I would like to do it right, if possible.
It's a pretty simple set up of 3 pieces, 2x 55cm for the sides and 1x 218cm for the back with two internal joints into...
Internal corners for worktop upstands