Fitting rest of kitchen after levelling?
I'm doing up my kitchen. There is prob 30% quarry tiles and 70% concrete, with lots of bumps and ridges where walls and Rayburns and fireplaces were. So I'm going to grind down the high spots, fill the...
View Articleprotection for worktop
I have some worktop to trim using router and find the masking tape I use to protect the worktop snags up under router, any suggestions as to what else I could use?
View ArticleCooker good installation into chimney breast
Wanting to install a cooker hood above our range which replaced an old aga in a chimney alcove. At the moment it’s just a nice big gaping hole up the chimney breast, looking at an Elica model as they...
View ArticleFinishing cut edges.
Evening all, Can anyone advise how cut edges should be finished? Specifically, I have installed a DIY kitchens island and my island back board needed to be trimmed down top and one side The top cut is...
View Articleequivalents to colorfill
looking for some colorfill to do worktop joints but know one knows the best shade to get (spoke to manufacture of worktop, our supplier, there supplier and Unika), I sent a sample to unika for them to...
View ArticleWickes Installation
Hi guys i have just been offered the chance to fit for wickes under their new installers system. Have any of you guys signed up for it.
View Articleunder wall unit lighting
Is there a general guide as to how many led lights (or spacing) under wall units is preferred?
View ArticleUnused space in kitchen?
My kitchen isn’t particularly big and I’m forever short of storage space. In the attached photo, I’m looking at 3 unused bits of space A, B and C, on the side of my kitchen that has my sink and my...
View ArticleKitchen extractor point
Hi I wonder if anyone can help or point me in the right direction. I want to add an induction hob on a kitchen island and I have an open plan kitchen as well and I understand that an extractor fan...
View ArticleSecuring Quartz worktop
Afternoon all, I stupidly forgot to fix my kitchen Island down to the floor before the quartz worktops arrived. The install team said I can fix the island worktop down at a later date using silicone....
View ArticleLoose Rawlplug
I have a splash back where one of the fixings has come loose as the plug has come out of the drilled hole. Is it possible to fix this without taking the whole of the splash back off the wall as would...
View ArticleKitchen window sill is damaged
Hi I have moved into a house and looking for advice on kitchen window sill and how to fix it. I previously had tiles on the window sill however the grout started to crack and the tiles started to lift....
View ArticleCabinet door pattern
I need to find these kitchen doors. The kitchen was fitted 5 years ago in a new buiod but fitter is not about anymore Ive been searching cabinet doors and it looks a little like beat butt doors but...
View ArticleIssue with Quartz Worktop
Hi, We had a quartz worktop installed around 8 weeks ago. However, 3 small pits/holes have now developed along the same length of worktop. One of these imperfections is a perfect circle with cloudy...
View ArticleBoiler and pipes in awkward place
I'm scratching my head on what to do with a run of units because of the position of the existing boiler and the pipework. I should have took a picture but didn't so will take one on Tuesday. I'll...
View ArticleSeal Around Cooker Hob problems
Got a gas hob put in about 5 years ago. Around it is a seal of some kind that for whatever reason, time, food getting spilled on it or cleaning products has went one disgusting looking manky colour....
View ArticleKitchen worktop wearing away underneath! - HELP
I had a brand new kitchen installed from Wren 9 months ago, on the laminate countertop underneath the edge of the overhang, it seems the wood is breaking up, must be something to do with water. the...
View ArticleKitchen splashback tile against cabinet
Wondering what the most successful solution would be for this. I'm tiling the kitchen splashback and wanting to know how best to finish the cut tile at the end of each row, specifically, where it meets...
View ArticleFenix Bonded worktop
We're are considering buying this worktop from Worktop Express, together with the sink. In reality, how easy is it to cut the spaces for the sink and tap? To cut the product? And to fit? It's the...
View ArticleBadly fitted worktop- can this be salvaged?!
We had a carpenter/kitchen fitter in last week to fit our new kitchen purchased from Wren. The carpenter had carried out work for us previously which we were really happy with including fitting new...
View Article