I'm nearing completion of fitting my kitchen and about to fit the upstands and skirting
They are Egger laminate upstands and i notice, that the bottom edge that will sit on the worktop is untreated/plain MDF (that's just how it comes it seems)
I used 3 coats of varnish and then a coat of sealant for the sink cut-out to make doubly sure that there was no chance of water ingress...would varnish be suitable for the bare MDF edge on the upstand also ?
I would prefer not to run a bead of...
Sealing and fitting MDF upstands and skirtingboards
They are Egger laminate upstands and i notice, that the bottom edge that will sit on the worktop is untreated/plain MDF (that's just how it comes it seems)
I used 3 coats of varnish and then a coat of sealant for the sink cut-out to make doubly sure that there was no chance of water ingress...would varnish be suitable for the bare MDF edge on the upstand also ?
I would prefer not to run a bead of...
Sealing and fitting MDF upstands and skirtingboards