Just put down some new laminate flooring in the kitchen, it's a bit thicker than the previous stuff & now the plinths wont fit & need a bit trimmed off them, but I'm struggling to see how to make a decent job of it without being at it forever.
I've jot a decent jigsaw, but at 2>3mm I imagine the blade is just going to walk right out of the cut - I suppose I could Bevel cut with the jigsaw towards the back side of the plinth to keep the blade in the plinth may work, but I typically find that...
Trimming 2>3mm from plinth / kickboard
I've jot a decent jigsaw, but at 2>3mm I imagine the blade is just going to walk right out of the cut - I suppose I could Bevel cut with the jigsaw towards the back side of the plinth to keep the blade in the plinth may work, but I typically find that...
Trimming 2>3mm from plinth / kickboard