Hi all,
First time posting here, but used it many times in the past for good info, so hoping someone can help.
I'm fitting kitchen worktops. Probably should have got someone in to do the job, but thought I'd tackle it.
Ive borrowed a neighbours router and jig. the jig is branded as Magnet trade, but I think its basically the Unika one. Female cuts are fine. The wortop is 635mm deep, so I need to add a 15mm shim on rough edge to use the 650mm peg holes.
The problem I'm having is with the...
Worktop jig, male cut, what am I doing wrong!?
First time posting here, but used it many times in the past for good info, so hoping someone can help.
I'm fitting kitchen worktops. Probably should have got someone in to do the job, but thought I'd tackle it.
Ive borrowed a neighbours router and jig. the jig is branded as Magnet trade, but I think its basically the Unika one. Female cuts are fine. The wortop is 635mm deep, so I need to add a 15mm shim on rough edge to use the 650mm peg holes.
The problem I'm having is with the...
Worktop jig, male cut, what am I doing wrong!?