I'm doing up my kitchen. There is prob 30% quarry tiles and 70% concrete, with lots of bumps and ridges where walls and Rayburns and fireplaces were. So I'm going to grind down the high spots, fill the cracks and divots, then self-level the whole lot, then put sheet vinyl down.
My question is, once it has gone off, is self-leveller hard wearing enough to put down more or less first, then plumb/plaster/paint/tile, then put vinyl down? Afaik it's basically fine cement with additives to alter...
Fitting rest of kitchen after levelling?
My question is, once it has gone off, is self-leveller hard wearing enough to put down more or less first, then plumb/plaster/paint/tile, then put vinyl down? Afaik it's basically fine cement with additives to alter...
Fitting rest of kitchen after levelling?